Bansal Wire Industries Limited Ghaziabad, Uttar Pradesh

New Items

Spring Steel Wires

Spring Steel Wires

Spring Steel Wires: Spring Steel wires are cold drawn wires made from unalloyed high carbon steel. These wires are used for the manufacture of cold formed helical springs, spring rings and wire forms which find application in automobile, cycle and other industrial equipments. These wires are generally supplied in phosphate and oiled condition.

We can supply wires to specific customer requirement within the Specifications:
StandardIS:4454(part1)-1975, Grade 1 & 2
ASTMA227/A227M, A679/A679M
BS1408B & BS: 1408C


Packing:Spring Steel Wires are normally oiled and packed with polythene and Hessian.

Usage:Industrial

Spring Wires

Spring Wires

Our stainless steel wires for steel springs are high tensile strength wires for precisions springs, compression springs, tension springs, wire form, pins and wire ropes.

These wires have smooth surface, high corrosion resistance, high fatigue strength, excellent heat resistance and are free from lateral / longitudinal cracks, pits and marks etc.
Wires can be supplied as per Customers specifications.

Specifications:
Grades302,304 & 316
DiameterRange 0.10 mm to 5.00**mm
Condition1/2 Hard, 3/4 Hard or Full Hard
FinishesBright or Matt finish
ApplicationsHardwares, Electronics, Electricals, Automobiles, Writing Instruments, Oil Seals and other Industrial Usages.

Spring Washers Wires

Spring Washers Wires

These are shaped wires in Square, Rectangular or Trapezoidal cross section manufactured from high carbon steel generally conforming to EN-42B/En-42C. The wires are custom built for the taper required. The wires are supplied in Drawn & Annealed finish. These wires are used in the manufacture of springs, spring washers and snap rings.

Specifications:
Cross section Size (mm)UTS(kg/mm2)EdgesTaper Angle
Square 0.8 x 0.8 to
8.0 x 8.0
60-90Natural / Round / Sharp-
Rectangular/ Trapezoidal 0.9 x 0.5 to
10.0 x 6.0
60-90Natural / Round / Sharp0 or 3-5,or as desired

Packing: The spring washer wires are supplied in 450-500mm. I.D coils with a coil weight of 50-250 kgs., depending on size of wire. The coils are oiled and packed with polythene and Hessian.

Tolerance on Thickness: ± 0.05 mm and Width : ± 0.05 mm

Steel Wire Rod

Steel Wire Rod

Our organization is well known in the industry for catering a distinguished segment of Steel Wire Rod. These products are made from high quality components.

Features:

1. High strength increasing bearing capacity.
2. Good wearing quality.
3. Quick heat radiation.
4. Pretty elasticity.

Cable Armouring Round Wires

Cable Armouring Round Wires

Specifications:
Size mm0.450.700.901.251.401.602.002.503.154.00
Tolerance mm (+/-)0.020.0250.030.0350.040.0450.050.0650.080.10
ZINC Coating Gm/Sq. Mt.456075909095105110120135
Tensile Strength Mpa300 - 500300 - 500300 - 500300 - 500300 - 500300 - 500300 - 500300 - 500300 - 500300 - 500
Elongation % (MIN.)10101010101010101010
Resisitivity Ohm-Cm X 10 -6max14.514.514.514.514.514.514.514.514.514.5

Cold Drawn Bright Steel Wire

Cold Drawn Bright Steel Wire

Cold Drawn Bright Steel Wire Excellent corrosion resistance and mechanical strength and is the most suitable material for bolts, screws and other fasteners and has a marked work hardening characteristics.

Stainless Steel MIG Wire

Stainless Steel MIG Wire

Our Stainless Steel MIG Wire are suitable for Stainless Steel Welding and Cryogenic applications. We manufacture wires in Bright finish for MIG Powder finish for Core wire, which provide better flux adhesion and corrosion resistance.

Aluminium Alloy Wires

Aluminium Alloy Wires

Magnesium is the primary constituent in Aluminium Alloy Wires alloy. AA is moderate strength, non-heat treatable alloy that combines its Strength with excellent Formability & Corrosion Resistance. Aluminium's unique combination of properties make it a highly versatile material when alloyed with various metals. Besides light weight characteristics and corrosion resistance property it's excellent workability make it a natural choice for industrial use.

AA wires are used in many products by the leaders of the industry as raw material.

Applications:
GRADESI % (max)FE % (max)CU % (max)MN %MG %CR. %ZN % (max)TI %Other (max)Aluminium
50190.400.500.100.10 - 0.604.50 - 5.600.20 (MAX)0.200.20 (MAX)0.15Balance
50500.400.700.200.10 (MAX)1.1- 1.80.10 (MAX)0.25-0.15Balance
50520.250.400.100.10 (MAX)2.2- 2.80.15 - 0.35--0.15Balance
50560.300.400.100.05 -0.204.50 - 5.600.05 -0.200.10-0.15Balance
51540.450.450.100.80 - 1.302.80 - 3.50-0.200.20 (MAX)-Balance
53560.250.400.100.05 -0.204.50 -5.500.050 - 0.200.100.06 - 0.200.15Balance
57540.400.400.100.50 (MAX)0.26 - 360.30 (MAX)0.200.15 (MAX)0.15Balance
61010.3 - 0.70.50.100.03 (MAX)0.35 -0.380.03 (MAX)0.10-0.15Balance
62010.600.220.007-0.63 (MAX)0.004 (MAX)0.008NI 0.003 (MAX)PB 0.007Balance

MIG Wire

MIG Wire

Our MIG Wire  are suitable for Stainless Steel Welding and Cryogenic applications. We manufacture wires in Bright finish for MIG Powder finish for Core wire, which provide better flux adhesion and corrosion resistance. 

Circlip Wires

Circlip Wires

These are shaped wires in Square or Rectangular cross section manufactured from high carbon steel generally conforming to EN-42C/ EN-42J. The wires are custom built to suit customers’ actual requirements. These wires are supplied in Annealed finish. These wires are used in the manufacture of lock circlips used for locking shafts.

Specifications:
Cross section Size (mm)UTS(kg/mm2)Edges
Square/ Rectangular2.3 x 1.2 to 10.0 x 4.060-90Natural / Round / Sharp


Packing: The circlip wires are supplied in 450-500mm. I.D coils with a coil weight of 50-200 kgs., depending on size of wire. The coils are oiled and packed with polythene and Hessian.

Tolerance on Thickness:
± 0.05 mm and Width : ± 0.10 mm

Heat Resisting Wire Conveyor Belts

Heat Resisting Wire Conveyor Belts

These wires are used in manufacturing of Conveyor Belts, which are exposed to high temperatures & oxidation, under severe conditions.

Specifications:
Grades304/304L, 310/3105, 314 and 316
Diameter0.30mm to 5.00mm**
ConditionAnnealed & Drawn
FinishesBright & Smooth
ApplicationsConveyor Belts & Filters

Galvanized Steel Core Wire for ACSR Conductors

Galvanized Steel Core Wire for ACSR Conductors

Specifications:
Diameter1.57 MM to 4.09 MM
QualityCommercial & ISI
StandardsI S : 3 9 8 ( P 2 ) - 1 9 9 6 , IS:398(P5)-1996, BS EN 50189:2000
ApplicationsCables & Conductors G.I Wires can also be manufactured as per customers specifications.

Needle Wires

Needle Wires

Needle wires are bright annealed and drawn High Carbon Steel.

Needle wires are used in Hand sewing and Hosiery Industries.

Specifications:
DiameterRange 0.76mm to4.0mm.
PackingThe finished wires are dipped in rust preventive oil, and packed with polythene and Hessian.

Profile /Shaped Wires Circlips

Profile /Shaped Wires Circlips

Shaped Wires are in Square or Rectangular cross section manufactured from high carbon steel generally conforming to EN-42C/ EN-42J. The wires are custom built to suit customers’ actual requirements. These wires are supplied in Annealed finish. These wires are used in the manufacture of lock circlips used for locking shafts.

Specifications:
Stainless SteelStainless Steel, High Carbon Steel Low or Mild Carbon Steel
Cross sectionFlat, Square, Triangular, Half Round and Trapezoidal
ApplicationsThese wires find application in automobile sector for manufacturing of Washers, Circlips, Springs, Wiper Arms, Blades, Auto Cables (Inner & Outer), Kitchen Accessories, Utensils Etc.

Cross SectionThicknessThickness: WidthCorners
Min.(m.m)Max.(m.m)Max.
Flat0.50.97 timesNatural/Sharp
126 timesNatural/Sharp
2.134timesNatural/Sharp
Cross SectionThickness x WidthThickness:WidthCorners
Min.(mm)Max. (m.m)Max.
Square0.7 x 0.78.0 x 8.0-Round/Sharp
Rectangular0.5x0.96.0x10.0-Round/Sharp
Trapezoidal1.2x 1.86.0 x10.0-Natural/Round/Sharp
Cross SectionThickness/RadiusThickness: WidthCorners
Min.(mm)Max.(m.m)Max.
Half Round1.4/0.710.00/5.004timesNatural/Round/Sharp

Carbon Steel Wire

Carbon Steel Wire

Carbon Steel Wire

Bansal Wire Industries Ltd. (BWIL) manufacture High Carbon Steel Wires in various cross sections in carbon 36 to 85. HCS wires are known for their hardness & high tensile strength

BWIL offer wires in various finishes i.e. annealed, patented, hard, coated (Phosphate & Oiled condition), and clean surface.

The High Carbon Steel Wires, by BWIL, are used to manufacture automotive products, Balls & Taper Roller Bearings, Braiding Hoses, Brushes, Chains, Conveyor Belts, Filters, Free Cutting Wires, Fasteners, Screws, Bolts, Needles, Spokes, Springs, Tying Wire. Wire Ropes, Shots, Wire Mesh etc. Annealed wires are used for redrawing also.

All properties like hardness, tensile strength, size tolerance, coil weight etc. are maintained as per customers’ specification.

• Round wire

• Shaped Wire

High Carbon Wire

High Carbon Wire

We are offering high quality range of High Carbon Wire. These products are widely demanded by the clients for their precise use.

Fine Wire

Fine Wire

Fine Wires in Bright Annealed Conditions.These wires are suitable for making Wire Meshes, Fillers, Sieves, Scrubbers, Weaving, Braiding Hose, Jewellery, Shots, Brushes, Staples etc.

Our wires have smooth surface finish & high resistances to corrosion

Copper Coated Steel Wire

Copper Coated Steel Wire

Copper Coated Steel Wire, commonly abbreviated as CCS is an electrical conductor composed clan inner mild steel core wire and outer copper coating.

Specifications:
Diameter0.71 mm - 2.25 mm."

Features:
Main Properties:
Application:
Dia (mm)"Copper Conductivity (%)""DC Resistance at 20°C 1 (Ohm/Km)"
0.8350.26121
1.050.16124.3
1.050.18110.5
1.050.2194.7
1.850.2624.6
2.250.2120.6

Copper Coated Steel Wire

Copper Coated Steel Wire

Copper Coated Steel Wire, commonly abbreviated as CCS is an electrical conductor composed clan inner mild steel core wire and outer copper coating.

Features:

1. High intensity: is 2 times than pure copper wire that is if the tensile strength. of pure copper wire is about 215 to 265, then CCS can reach 430 to 530.

2. Light weight: lighter 13% than pure copper wire. Under the same wire size and weight, its length is 1.13 times than that of pure copper wire. So buying 1 ton. CCS wire is the same as buying 1.13 tons’ pure copper wire.

3. Saving cost: CCS wire price is just 35% of that of pure copper wire and its appearance quality is the same with pure copper wire.

4. Reducing greatly the production cost while guaranteeing the same quality as well as pure copper wire.

Main Properties:

• Good corrosion resistance of copper

• High tensile strength of steel

• Much lower impedance at high frequencies than that of steel wire alone

Application:

1. lnner conductor ofterminal CATVcoaxialcable

2. Conductive cord of user communication cable for double conductor telephones.

3. Pluginsfor electronic components.

4. Conductive cord of field wires.

5. Overhead system for power transmission and telephone lines.

6. Overhead-contact systems for railway and Light Rail Transit.

7. Braided shield wire of power cable.

8. Earthing pole for electrical power industry.

 

Braided Wires

Braided Wires

We manufacture stainless steel wires in AISI 200,300 and 400 series. These wires are available in various finishes viz. soft, quarter (1/4) hard, half (1/2) hard or full hard in different surface finishes like bright, mat / dull depending upon the requirement of the buyers.

Our range of stainless steel wires bars are used to manufacture automotive products, balls taper roller bearings, braiding hoses, chains, conveyor belts, filters, free cutting wires, fasteners and wire nails, flexible connectors, kitchen ware and gadgets, mig tig welding, needles, pins, sieves, spokes, springs, surgical equipments, scrubber / scouring pads, steel wool, utensils, woven knitted wire cloth, wall ties tying wire, wire ropes, welding electrodes and fillers etc. Annealed wires are also used for redrawing.

Hot Dip Galvanized Wire (G.I.)

Hot Dip Galvanized Wire (G.I.)

BWIL offers Hot Dip G.I. Wires of consistent mechanical properties, uniform zinc coating, bright surface finish.

Zinc Coating is done through Hot Dip Galvanizing process.

Specifications:
Diameter0.37 mm to 5.0 mm
StandardIS:280-2006/as per customer
Zinc Coating30 to 290 Gms/Sq Mt

Size mm1.251.401.601.802.002.242.502.803.153.554.004.505.00
Tolerance mm (+/-)2.5% FOR ALL SIZES
Tensile Strength Mpa300 - 550300 - 550300 - 550300 - 550300 - 550300 - 550300 - 550300 - 550300 - 550300 - 550300 - 550300 - 550300 - 550
Zinc Coating Gm/Sq.Mt.Light4050606070708090100110120130130
 Medium90909595105105110120120135135150150
 Heavy180200210230240240260260270270280290290

We also offer, G.I Cable Armour Wire as per IS: 3975-1999 for use in cable industry.
High carbon G.I. wires for ropes, springs, wire mesh etc. are offered too.

Applications: Poultry Mesh Chain Link Fencing, Barbed Wires, Galvanized Fencing Wire, Fine Wire Mesh, Trolleys, Baskets, Stranded Ropes, Stay Wires, Bailing Wires, Telegraph /Telephone Wires, Gabbian Mesh Wires etc.

Welding Wires

Welding Wires

Our stainless steel welding wires are suitable for stainless steel welding and cryogenic applications. They have excellent flux adhesion and corrosion resistance.

Specifications:
GradesAISI 202, 304, 304L/ER304L, 307 LSI, 308/E R 308 L, 309/ER309L, 310/ER310, 316L/ER316L & 430L etc.
Diameter
Core WireCore wire for electrode in coil from 1.60mm to 5.00**mm.
MlG Wirewire on spools from 0.80 mm to 1.60**mm
TIG WireIn cut length 1.60 mm to 5.00**mm.
Finish
Core WireBright or Powder Coated
MlG WireBright or Cleaned
TIG WireBright or Cleaned
Packing
Core WireIn Coils of 100-125 Kgs
MlG WirePlastic Spools of 12 Kgs/15Kgs
TIG Wire1000 mm / 500 mm length in Plastic sleeves. On every TIG Wire length, grade of the wire is engraved.

Circlip Wire

Circlip Wire

These are shaped wires in Square or Rectangular cross section manufactured from high carbon steel generally conforming to EN-42J. The wires are custom built to suit customers' actual requirements. These wires are supplied in Annealed finish. These wires are used in the manufacture of lock circlips used for locking shafts.

Specifications:
Cross section Size (mm)UTS(kg/mm2)Edges
Square 2.3 x 1.2 to60-90Natural / Round / Sharp
Rectangular10.0 x 4.0Natural / Round / Sharp

Circlip Wires

Circlip Wires

These are shaped wires in Square or Rectangular cross section manufactured from high carbon steel generally conforming to EN-42C/ EN-42J. The wires are custom built to suit customers’ actual requirements. These wires are supplied in Annealed finish. These wires are used in the manufacture of lock circlips used for locking shafts.

Specifications:
Cross section Size (mm)UTS(kg/mm2)Edges
Square/ Rectangular2.3 x 1.2 to 10.0 x 4.060-90Natural / Round / Sharp


Packing: The circlip wires are supplied in 450-500mm. I.D coils with a coil weight of 50-200 kgs., depending on size of wire. The coils are oiled and packed with polythene and Hessian.

Tolerance on Thickness:
± 0.05 mm and Width : ± 0.10 mm

Stainless Steel Wires

Stainless Steel Wires

We manufacture Stainless Steel Wires. These wires are available in various finishes viz. soft, quarter (1/4) hard, half (1/2) hard or full hard in different surface finishes like bright, mat / dull depending upon the requirement of the buyers.

Our range of stainless steel wires & bars are used to manufacture automotive products, balls & taper roller bearings, braiding hoses, chains, conveyor belts, filters, free cutting wires, fasteners and wire nails, flexible connectors, kitchenware and gadgets, mig & tig welding, needles, pins, sieves, spokes, springs, surgical equipments, scrubber / scouring pads, steel wool, utensils, woven & knitted wire cloth, wall ties & tying wire, wire ropes, welding electrodes and fillers etc. Annealed wires are also used for redrawing.

Specifications:
Grades201, 202, 204CU, 302, 302HQ, 303, 304, 304L, 304CU, 304HC, 307LSI, ER308L, ER3091_, ER310, 310/S, 314, 316, 316L, ER316L, 316Ti, 321 ER, 410, 430L, 434.
Diameter0.040mm -16 mm**
ConditionSoft, 1/4 Hard, 1/2 Hard, Full Hard, HRP & Solution Annealled
FinishBright, Matte Finish, Soap Coated or Electro Polish Quality
ApplicationAutomotive Products, Balls & Taper Roller Bearings, Braiding Hoses, Brushes, Chains, Conveyor Belts, Filters, Free Cutting Wires, Fasteners, Nails, Flexible Connectors, Kitchen Ware and Gadgets, MIG & TIG, Welding, Needles, Shots, Pins, Sieves, Spokes, Springs, Surgical Equipments, Screens, Scrubber/Scouring Pads,Steel Wool, Utensils, Woven & Knitted Wire Cloth, Wall Ties & Tying Wire, Wire Ropes, Welding Electrodes, Filters, Hinges and Handles etc.

Galvanized Steel Wires

Galvanized Steel Wires

These wires are patented galvanized drawn wires manufactured from High Carbon Steels. These wires are used for manufacture of Auto Cables, Steel Wire Ropes, Cold formed Helical Springs and Wire Forms.

Specifications:
DiameterWe supply these wires in the range 0.22 mm to 3.0 mm.
StandardIS:4454(Part 1), Grade 1 & 2 and also as per IS:1835
PackingThe coil weight is generally maintained in range or 10 to 200 kgs. depending on the size of the wire.

Galvanized spring steel wires are normally packed with polythene & Hessian cloth.

Scrubber Wires

Scrubber Wires

Stainless Steel Wires for Scrubbing applications have a very bright smooth finish and the extra softness enables further cold working by the customer.

Specifications:
Grades304, 410 & 430
Diameter0.13 mm to 0.80 mm**
ConditionAnnealed & Wet drawn
FinishesBright & Smooth
ApplicationsScrubbers

Cold Rolled Strip Steel

Cold Rolled Strip Steel

We are the leading manufacturer of Cold Rolled Strip Steel.

Special Features:

Bright Steel Wire Rope

Bright Steel Wire Rope

Bright Steel Wire Rope are cold drawn wires made from unalloyed high carbon steel. These wires find application in construction, mining, shipping and various other heavy industries.

We can supply wires in four grades of steel wires to specific customer requirement within the specifications.

High Carbon & Low Carbon Steel Wires

High Carbon & Low Carbon Steel Wires

Bansal Wire Industries Ltd. (BWIL) manufacture High Carbon Steel Wires in sizes ranging from 0.30mm to 6.00mm in carbon 36 to 85. We also manufacture various sizes in Square, Rectangular, Trapezoidal cross sections from 0.8 x 0.8 mm to 10.0 x 6.0 mmin different carbons. We offer wires in various finishes i.e. annealed (Patented & Spherodise annealed), hard, coated (Phosphate & Oiled condition), and clean surface. All properties like hardness, tensile strength, size tolerance, coil weight etc. are maintained as per customers’ specification.

BWIL, manufactures Low Carbon Mild Steel Wires in sizes ranging from 0.40mm to 12.00mm in round wires. We also manufacture various sizes in Square, Rectangular, and Trapezoidal cross sections. We offer mild carbon steel wires in H.B., H.H.B., Welding Electrode Quality, Annealed wires.

The High & Low Carbon Steel Wires, by BWIL, are used to manufacture automotive products, Balls & Taper roller Bearings, Braiding hoses, Chains, Conveyor belts, Filters, Free cutting wires, Fasteners, Screws, Bolts, Needles, Spokes, Springs, Tying wire, Wire ropes ,wire mesh etc. Annealed wires are used for redrawing also.

Following are some of the special utility and industrial products, made out of our wires. Besides these, lot of other general engineering products are made from our wires.

Mild Carbon Steel Wires

Mild Carbon Steel Wires

BWIL offers Low Carbon Steel in Wires & Bright Bars for various applications. They are known for varied industrial usages for their ductility and softness.

We offer various sizes and cross sections for the same.

Specifications:
ProductHB, HHB, EQ.
Cross SectionRound, Square, Rectangular & Trapezodial Section
GradeSAE/AISI1006, 1008, 1010, 1012, 1015, 1018, 1020 etc.
Size
Round Wire0.40mm to 16.00mm**
Shaped WireAs per customer's requirement
ConditionDrawn, Annealed, Annealed Drawn, Normalized in Black condition. Also, Coated with rust preventive oil as required by customer.
Coil ID200rnm to 1000mm
Coil WeightAs per customer's requirement
PackingPolythene/Hessian Cloth
ApplicationsNeedles, Safety Pins, Steel Fibers, Steel wools, Nuts, Bolts, Rivets, Studs, Nails, Wire Mesh, Weld Mesh, Screws, Chains, Cut Shots, Staples Pins, Kitchen Ware, Decorative Items & other for General Engineering Purposes.

Electrical Wires

Electrical Wires

We are highly acknowledged organisation engaged in presenting the remarkable range of Industrial Electrical Wire.

Technical Specification:


Product

 

Industrial Wire

Material

Aluminium, Copper

Color

Available in multicolor

Housing material

MS

Features

Customized design

Warranty

2 year manufacturer warranty

Application

Wiring Purpose

Stainless Steel Coils Bobbins Wire

Stainless Steel Coils Bobbins Wire

Bansal Wire can manufacture various kinds of stainless steel shielding welding wire which are widely used in ship buliding , automobile, chemical, electric power, food, medicine, etc. Stainless steel shielding welding wire is one of our main products and has been sold out to all over the world.

Size and Diameter:

Surface and Finishing:

Application and Usage:

Packing:


Brand

Size

Application

Steel Profile

Steel Profile

We are leading manufacturer and exporter of Steel Profile.

Conveyor Belt Wires

Conveyor Belt Wires

Features:

Electrode Wire Rod

Electrode Wire Rod

BWIL offers Electrode Wire Rod of consistent mechanical properties, uniform zinc coating, bright surface finish. These are mild carbon or high carbon steel wires, which are coated with Zinc , so as to impart the base wire with superior properties.

The Zinc coated galvanized wires are highly resistant to Moisture and mechanical damage (than other surface coatings), and have a very bright and smooth surface finish.

Industrial Round Wire

Industrial Round Wire

Industrial Round Wire is a metal cover usually applied in form of wire or formed wire, intended to protect the cable from mechanical damage.

We manufacture Industrial Round Wire including Round / Formed wires for cable industries, as per Indian / International specifications e.g. IS-3975 / 1999 and BS – 1442.

Stainless Steel Spring Wire

Stainless Steel Spring Wire

Our Stainless Steel Spring Wire are High Tensile Strength wires for Precision's Springs, Compression Springs, Tension Springs, Wire Form, Pins and Wire Ropes. 

These wires feature smooth surface, high corrosion resistant, high fatigue strength, excellent heat resistance and are free from Lateral / Longitudinal Cracks, Pits and Marks etc.

Wires can be supplied as per Customers specifications in ½ Hard, ¾ Hard or Full Hard condition

Bailing Wire

Bailing Wire

We provide an extensive range of Bailing wire to our clients. Our range is suitable for packaging. As an ultimate fast baling product, Precise Alloys is the best option for fast-tie baling for cotton, corrugated waste, paper waste, cotton waste, pet bottle waste and grass bailing and for any material which expands after baling. The product is bundled and tied for relieve for handling with ends protected during transit.

Features:

Aluminium Alloy Magnesium Wires

Aluminium Alloy Magnesium Wires

Manufacturer of Aluminium Alloy Magnesium Wires in India with Various Grades. The wire is being Used in Braiding of Coaxial Cable, Flexible Data Transfer Cable, Rivets, Wire mesh, Tea bags Stapler Pins, Electric fencing , CCA Wire and many.

Stainless Steel Wire Rope

Stainless Steel Wire Rope

Stainless Steel Wire Rope are cold drawn wires made from unalloyed high carbon steel. These wires find application in construction, mining, shipping and various other heavy industries.

We can supply wires in four grades of steel wires to specific customer requirement within the specifications.

Aluminium Magnesium Wires

Aluminium Magnesium Wires

Manufacturer of Aluminium Magnesium Wires in India with Various Grades. The wire is being Used in Braiding of Coaxial Cable, Flexible Data Transfer Cable, Rivets, Wire mesh, Tea bags Stapler Pins, Electric fencing , CCA Wire and many.

Aluminium Wires

Aluminium Wires

Manufacturer of Aluminium Wires in India with Various Grades. The wire is being Used in Braiding of Coaxial Cable, Flexible Data Transfer Cable, Rivets, Wire mesh, Tea bags Stapler Pins, Electric fencing , CCA Wire and many.

Low Carbon Steel Wires

Low Carbon Steel Wires

Features:

Low Carbon Steel Wires

Wire Assembly

Wire Assembly

We are distributor and supplier of an extensive range of Wire Assembly. Our product is highly appreciated for their durability, high functionality and sturdy construction..

Wire

Wire

The wire in pail packs (Drum Pack / Jumbo Pack / Marathan Pack) is used as advance technology in MIG welding or large component welding requiring several welding machine to weld same work piece. So it is very important to get a good wire feeding. The wire which is used for pail packing must be high quality .In order to wind the wire to a pail smoothly the wire must be have good cast and helix control. The difference in pail pack and wire on formers is that it is straight wire. So, it is necessary to use a good straightening practice for feed wire and it is better to add a straightener before wire spooling machine.It is an upgraded version of precision layered winding welding wire.

The machine can run automatically except for initial wire feeding, straightening wires (cast helix setting) and removing/placing barrels. Its precise winding control and pre-spiraled treatments make sure to feeding welding wires smoothly in the welding process. Furthermore, welding wire barrels of various specifications can be customized optionally. All these make the machine at par with equipment available anywhere in the world.

 

Features :

 

Stainless Steel Bright Bars

Stainless Steel Bright Bars

Specifications:
Grades201, 304, 410, 430L
Diameter4mm to 16mm**
Length3/4/5/6 meter
ConditionCold Drawn, Centreless Grinded & Polished
ApplicationMachine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges, Handles and Kitchen Ware.

Galvanized Wires

Galvanized Wires

BWIL offers G.I. Wires in size range 0.37mm to 5.0**mm, of consistent mechanical properties, uniform zinc coating, bright surface finish. These are mild carbon or high carbon steel wires, which are coated with Zinc , so as to impart the base wire with superior properties.

The Zinc coated galvanized wires are highly resistant to Moisture and mechanical damage (than other surface coatings), and have a very bright and smooth surface finish.

Conveyor Belt Wires

Conveyor Belt Wires

CONVEYOR BELT WIRES Wires for Conveyor Belts are bright annealed and drawn. Wires are offered in both round and flat cross sections for Conveyor Belts.

Specifications:
Diameter
Round Wire0.80 mm to 5.0 mm
Shaped Wire0.8 x 1.0 mm to 6.0 x 1.5 mm
PackingThe finished drawn wires are dipped in rust preventive oil, securely bound at four places and packed with polythene and Hessian.

Copper Coated Aluminium Magnesium Wire

Copper Coated Aluminium Magnesium Wire

Copper-coated aluminiurn magnesium wire, commonly abbreviated as CCAMW or CCAM, is an electrical conductor composed of an inner aluminium core and outer copper coating.

Specifications:
Diameter0.12 mm - 2.05 mm"
USESThe primary applications of this conductor revolve around weight reduction requirements. These applications include high-quality coils, such as the voice coils in headphones, or portable loud speakers; high frequency coaxial applications; such as RF antennas; CATV distribution cables; and power cables. CCAM is also being used in electrical wiring for buildings. The copper/aluminium construction was adopted to avoid some of the problems with aluminium wire, yet retain some of the cost advantage.
CCAM became extremely popular in emerging markets as a cheap replacement for copper category 5e twisted pair cables.

Properties: The properties of copper-coated aluminium wire include:
Skin Effect: The skin effect causes alternating current to concentrate on the more-conductive copper coating of the conductor, causing the resistance of the wire to approach that of a pure copper wire at high frequencies, which rnakes the copper-coated alurninium wire a good fit for such applications. The skin effect is also utilized in copper-coated steel wire such as RG-6 coax, which is also commonly used in high frequency applications with high strength requirements.

Galvanized Steel Wires

Galvanized Steel Wires

These wires are patented galvanized drawn wires manufactured from High Carbon Steels. These wires are used for manufacture of Auto Cables, Steel Wire Ropes, Cold formed Helical Springs and Wire Forms.

Specifications:
DiameterWe supply these wires in the range 0.22 mm to 3.0 mm.
StandardIS:4454(Part 1), Grade 1 & 2 and also as per IS:1835
PackingThe coil weight is generally maintained in range or 10 to 200 kgs. depending on the size of the wire.

Galvanized spring steel wires are normally packed with polythene & Hessian cloth.

Aluminum Alloy Wire Mesh

Aluminum Alloy Wire Mesh

Precision made INSECT GUARD is manufactured to the international standards and specifications.

Specifications:

Mesh :Material

Available Widths

Length/

Roll in Meters

Finish :

Packaging

 

18*14, 18x16, 14x14, (Cutomized as per requirement)

Aluminum Alloy Wire

2ft, 2.5ft, 3ft, 3.5ft, 3.7Sft. 4ft. 4.5ft, Sft

 

30 Metres (Cutomized as per requirement)

Aluminium, Steel Finish

One Roll Per Cardboard

 

Stainless Steel Round Bar

Stainless Steel Round Bar

We are leading manufacturer and exporter of Stainless Steel Round Bar.

Key Specifications/Special Features:

Bright Bars

Bright Bars

Our Bright Bars are available as per customer's requirement. The maximum length of the bar will be 6 meters. The tolerance level for different diameters are as per specifications.

Specifications:
GradesAISI 200, 300, 400
Diameter3.00 mm to 16.00**mm
FinishesCold Drawn, Centreless Grinded or Polished.
ApplicationsNozzles, Couplings, Threaded Bars, Stainless Steel Threaded Bars, Equipment Shaft, Hardware Products & Other Household Fittings.

Braiding Hoses Wires

Braiding Hoses Wires

Fine Wires in Bright Annealed Conditions, have high resistance to corrosion and a very bright lustrous surface.

Specifications:
Grades202, 304/304L, 310, 310S, 314, 316, 316L, 430L etc.
Diameter0.05mm to 0.80**mm in Coils/Spools
ConditionBright Soft, 1/2 Hard & 3/4 Hard
FinishesBright & Smooth
ApplicationsWire Meshes, Filters, Sieves, Scrubbers, Weaving, Braiding Hose, Jewellary, Shots, Brushes, Staples etc.

Wire Springs

Wire Springs

Our stainless steel wires for steel springs are high tensile strength wires for precision springs, compression springs, tension springs, wire form, pins and wire ropes.

These wires have smooth surface, high corrosion resistance, high fatigue strength, excellent heat resistance and are free from lateral / longitudinal cracks, pits and marks etc.

Wires can be supplied as per Customers

Specifications:

Mattress Spring Wire

Mattress Spring Wire

Mattress Spring Wires are cold drawn wires made from unalloyed high carbon steel. These wires are used for the manufacture of cold formed helical springs, spring rings and wire forms which find application in automobile, cycle and other industrial equipments. These wires are generally supplied in phosphate and oiled condition. We can supply wires to specific customer requirement within the specifications IS: 4454 (part1)-1975, Grade 1 & 2, ASTM: A227/A227M, A679/A679M, BS: 1408B & BS: 1408C.

Specification:
We supply wires from 0.30 mm to 6.0 mm**.

Packing:
The wire coils are supplied in weight of 10-250 kgs., depending on size of wire. Spring Steel Wires are normally oiled and packed with polythene and Hessian.

Cable Armouring Wires & Strips

Cable Armouring Wires & Strips

A Cable Armouring Wires is a metal cover usually applied in form of wire or formed wire, intended to protect the cable from mechanical damage.

We manufacture Cable Armouring Wires including Round / Formed wires for cable industries, as per Indian / International specifications e.g. IS-3975 / 1999 and BS – 1442.

Hot Dipped Galvanized Strips Round and Formed Wires (with round and flat cross section) are manufactured in modern galvanized furnace with latest technology to ensure superior quality. The formed and round wires have superior corrosion resistance, tensile strength and flexibility.

Kitchen Ware and Utensils

Kitchen Ware and Utensils

Our wires for kitchenware & utensils are suitable for electro polishing. They find application in food industries, medical applications, decorative and architectural use. We can also offer shaped/profiled wires, which are used for making kitchenwares globally.

Specifications:
GradesAISI 201, 202, 304, 316Q
Condition1.00 mm to 7.00**mm
DiameterSoft, 1/4 Hard, 1/2 Hard, 3/4 Hard & Full Hard
FinishesBright & Smooth
ApplicationsUsed for manufacturing fabricated Baskets, Trolleys, Trays, Kitchen Appliances, Formed Parts Etc.

High Carbon Steel Wires

High Carbon Steel Wires

Bansal Wire Industries Ltd. (BWIL) manufacture High Carbon Steel Wires in various cross sections in sizes ranging from 0.30mm to 6.00mm in carbon 36 to 85. HCS wires are known for their hardness & high tensile strength

Specifications:
Cross SectionRound, Square, Rectangular, Trapezoidal cross sections are manufactured.
Size
Round wire0.30mm to 6.00mm**
Shaped Wire0.8 x 0.8 mm to 10.0 x 6.0 mm **
Carbon36 to 85.

BWIL offer wires in various finishes i.e. annealed, patented, hard, coated (Phosphate & Oiled condition), and clean surface.

Applications: The High Carbon Steel Wires, by BWIL, are used to manufacture automotive products, Balls & Taper Roller Bearings, Braiding Hoses, Brushes, Chains, Conveyor Belts, Filters, Free Cutting Wires, Fasteners, Screws, Bolts, Needles, Spokes, Springs, Tying Wire, Wire Ropes, Shots, Wire Mesh etc. Annealed wires are used for redrawing also.

All properties like hardness, tensile strength, size tolerance, coil weight etc. are maintained as per customers' specification.

Ball Bearings

Ball Bearings

Ball Bearings are supplied in coils with phosphate coating to facilitate cold heading operation. These wires are used in manufacture of Balls, Needles, Rollers, Taper Rollers, and Cylindrical Rollers etc. The microstructure of wire, contains uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodise annealed. All properties like hardness, tensile strength, size tolerance, coil weight etc. are maintained as per customers’ specification, in annealed, pickled, phosphate, borax or annealed and drawn condition.

Specifications: 1.20 mm to 16.0 mm** in Grade : SAE 52100 (or EN31).

Packing: The finish drawn coils are coated with rust preventive oil, securely bound at four places and packed with LDPE films and Hessian. All coils bear steel identification tags. Each coil contains one length and is coiled anti-clockwise.

We specialize in supplying Bearing wires to customers’ actual needs.

Spring Wire & Spring Washers Wire

Spring Wire & Spring Washers Wire

These are shaped wires in Square, Rectangular or Trapezoidal cross section. The wires are supplied in Drawn & Annealed finish.

Base Material:
Stainless SteelThese are made from AISI 304 & 316. The wires are custom built for the taper required.
High Carbon SteelThe wires are manufactured from High Carbon Steel generally conforming to En-42C.
ApplicationsThese wires are used in the manufacture of steel springs, stainless steel spring washers and snap rings.

Cross section Size (mm)UTS(kg/mm2)EdgesTaper Angle
Square 0.8 x 0.8 to
8.0 x 8.0
60-90Natural / Round / Sharp-
Rectangular/ Trapezoidal 0.9 x 0.5 to
10.0 x 6.0
60-90Natural / Round / Sharp0 or 3-5,or as desired

Packing
The spring washer wires are supplied in 450-500mm. dia with coil weight of 50-250 kgs. The coils are packed with polythene and Hessian

Tolerance on Thickness
± 0.05 mm and Width : ± 0.05 mm

Profile Wires

Profile Wires

Shaped wires, also known as solid profiles, allow achieving complex geometries and cross-sections. These wires are manufactured from stainless steel, high carbon steel and mild steel wires as per the customer’s specific requirement, in Flat, Square, Triangular, Half round and Trapezoidal shapes.

The profile of the wires can be adjusted to meet customers actual needs. Wires can be supplied in annealed and drawn finish. These wires find application in automobile sector for manufacturing of washers, circlips, springs, wiper, arms, blades, auto cables (inner and outer), kitchen accessories, utensils, Flat, Square, Triangular, Half round and Trapezoidal shapes Etc.

Specifications

Cross SectionThicknessThickness: WidthCorners
Min.(m.m)Max.(m.m)Max.
Flat0.500.907 timesNatural/Sharp
1.002.006 timesNatural/Sharp
2.103.004 timesNatural/Sharp
Cross SectionThickness x Width Thickness:Width Corners
Min.(mm)Max. (m.m)Max.
Square0.7 x 0.78.0 x 8.0-Round/Sharp
Rectangular0.5 x 0.96.0 x 10.0-Round/Sharp
Trapezoidal1.2 x 1.86.0 x 10.0-Natural/Round/Sharp
Cross SectionThickness/Radius Thickness: Width Corners
Min.(mm)Max.(m.m)Max.
Half Round1.4/0.710.00/5.004 timesNatural/Round/Sharp

Bearing Steel Wires

Bearing Steel Wires

High carbon bearing steel wires are supplied in coils with phosphate coating to facilitate cold heading operation. These wires are used in manufacture of Balls, Needles, Rollers, Taper Rollers, and Cylindrical Rollers etc. The microstructure of wire, contains uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodise annealed. All properties like hardness, tensile strength, size tolerance, coil weight etc. are maintained as per customers’ specification, in annealed, pickled, phosphate, borax or annealed and drawn condition.

Specifications:1.20 mm to 16.0 mm** in Grade : SAE 52100 (or EN31).

Packing: The finish drawn coils are coated with rust preventive oil, securely bound at four places and packed with LDPE films and Hessian. All coils bear steel identification tags. Each coil contains one length and is coiled anti-clockwise.

We specialize in supplying Bearing wires to customers’ actual needs.

Cold Heading Quality Wires

Cold Heading Quality Wires

Specifications:
ProductHB, HHB, Drawn Round Wires and Bright Bars.
Grades(A) Mild Steel Wires - SAE/AISI 1006, 1008, 1010, 1012, 1015, 1018 and 1020
(B) Boron Steel Wires- 10B21, 15B25, 10B33, 15B41, 19MNB4 and 51B37
(C) Free Cutting Wires - EN1A, 12L14 and EN1A (L)
(D) Alloy Steel Wires - EN 18D, SAE 1541, 4135, 4140, SCM 415, SCM 420,16 MNCR5
SizesUp to 16.00mm
ConditionDrawn, Annealed, Spheriodised Annealed , Annealed Drawn and Phosphated Condition.
Coil IDUp to 1000mm
Coil WeightAs per customer's requirement.
PackingPolythene/Hessian Cloth
ApplicationsNuts, Bolts, Screws, High Tensile Fasteners, Automobile components, Studs, Ball Pins, Wheel Bolts & Philips Head Screws
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for New Items ?

    country-ico

    We will contact you soon !

    Anil Soni

    (Deputy General Manager)

    Bansal Wire Industries Limited

    Loni Industrial Area, Ghaziabad, Uttar Pradesh, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us